Connect an OBD2 adapter
A few minutes are enough, and the Bluetooth pairing only needs to be done once.
What you need
- An ELM327-type OBD2 adapter, Bluetooth or Wi‑Fi.
- Don't have one yet? See the adapters we have tried.
- An Android phone with the OBDmentor app.
- A vehicle with an OBD2 port: almost all cars have an OBD2 port from the late 1990s and early 2000s onward, depending on the regulations of each country.
Step by step: Bluetooth adapter
- 1
Locate the vehicle's diagnostic port (often under the steering wheel, sometimes near the center console).
- 2
Push your OBD2 adapter (ELM327 type) in all the way.
- 3
Turn the ignition on.
- 4
Pair your adapter in the phone's Bluetooth settings (the code is often 0000 or 1234).
- 5
Open the OBDmentor app and tap “Connect an OBD adapter”.
- 6
Choose the adapter you paired in step 4.
- 7
Read your fault codes and let the AI explain the problem.
BLE or Wi‑Fi adapter
Bluetooth Low Energy (BLE) adapter: no pairing in the phone's settings. Plug in the adapter, switch on the ignition, then tap “Search for BLE adapters” in the app.
Wi‑Fi adapter: first join the adapter's Wi‑Fi network in the phone's Wi‑Fi settings, then choose “Connect via Wi‑Fi” in the app and enter its IP address (in its manual, often 192.168.0.10).
Won't connect?
- Follow the instructions supplied with your adapter: some models have a power button or a specific pairing procedure.
- Check that the ignition is on: without it, the adapter gets no response from the vehicle.
- Check that the adapter is pushed in all the way; a light usually comes on on it.
- If the adapter does not appear in the app's list, redo step 4: it must first be paired in the phone's Bluetooth settings.
- Still stuck? Write to us at contact@obdmentor.com, stating the vehicle and the adapter model.